How To Setup Netgear EAX20 SETUP | AX 1800

How To Setup Netgear EAX20 SETUP | AX 1800

Written by Alison Lurie, In How To, Technology, Published On
August 13, 2021

Netgear AX1800 4-stream mesh extender EAX20 is designed to give exceptional WiFi capacity, speed, and coverage thanks to the newest generation WiFi 6 standard. All you have to do now is complete the Netgear EAX20 setup and start enjoying a more connected home. You can receive faster WiFi speeds of up to 1.8 Gbps even in the farthest part of your home with the AX1800 EAX20 WiFi 6 extender.

With 4-stream WiFi and more spatial streams, the mesh extender provides more accessible bandwidth and less congestion for all of your connected devices. For medium-sized households, the EAX20 extender is ideal.

You’ll discover how to set up a Netgear AX1800 EAX20 WiFi range extender without any problems in this article. Let’s begin.

Netgear AX1800 EAX20 Manual setup

A handbook will be included in the package when you purchase a new Netgear AX1800 EAX20 mesh extender. From beginning to end, the Netgear EAX20 Manual includes a series of setup instructions. To set up a Netgear AX1800 EAX20 extender, simply follow the procedures in the manual for Netgear AX1800 Setup.

Regular users, however, likely face difficulties to interpret these installation instructions. Contacting our experts is the ideal approach to quickly and easily install your Netgear EAX20 AX1800 WiFi extender. They will walk you through each step and correctly install your extender.

How to install Netgear AX1800 EAX20 with the WPS method?

To use the WPS push button to set up the Netgear AX1800 EAX20:

  • Turn on the model EAX20 AX1800 dual-band WiFi mesh extender.
  • In the same room as the extender, place the WiFi router.
  • Connect your extension to a power outlet once it’s finished.
  • Allow the EAX20’s Power LED to turn green before proceeding.
  • WPS (Wi-Fi Protected Setup): Press the WPS (Wi-Fi Protected Setup)
  • The connection between your router and extension is good if the Netgear EAX20 LED lights up white.

Note that if your router supports the 5 GHz band, when you initially hit the WPS button, your extender will attempt to connect to the router’s 5 GHz band. If your extender did not connect to the router’s 5 GHz band the first time, it could cause a slew of problems throughout the Netgear extender EAX20 setup process. Contact our professionals as soon as possible to remedy such situations.

  • Reposition your extender.
  • Bring your WiFi-enabled computer or mobile device to a location where the WiFi router signal is weak.
  • Connect to the extended network via a WiFi-enabled computer or mobile device.

That’s how you use the WPS button to finish your Netgear EAX20 Setup. Please feel free to contact our professionals if you run into any technical difficulties during the setup procedure.

Netgear EAX20 WIFI 6 Mesh Extender Setup

Follow the instructions below to manually configure your AX1800 4-stream WiFi mesh extender:

  • Start your Netgear AX1800 dual-band WiFi mesh extender model EAX20 by turning it on.
  • Place your WiFi extender near your router.
  • The extender should then be plugged into an outlet.
  • When the Power LED turns green, you’re ready to go.
  • Press the Power button if the Power LED doesn’t light up.
  • Use a WiFi or Ethernet connection to connect the Netgear EAX20 WiFi range extender.
  • Enter into a web browser on your PC or mobile device. Contact our specialists if isn’t working on your device.
  • The login screen for the Netgear EAX20 is shown.
  • Connect your extender to an existing WiFi network by following the on-screen instructions.
  • Reposition your extender.
  • If you have a bad or no connection, move the extender closer to your router and try again until the Link Status LED becomes white.
  • Connect your client devices to the extended WiFi network after you determine the ideal placement for your extender.
  • Contact our highly-experienced professionals if you still can’t get your Netgear EAX20 AX1800 Extender to work.

How to update Netgear EAX20 Firmware?

Have you noticed that your WiFi extension is acting strangely lately? Even after a successful Netgear WiFi extender, is it not providing the desired speed? If this is the case, the Netgear extender’s firmware should be updated as soon as possible.

Follow these steps to upgrade the firmware on your Netgear EAX20:

  • Turn on your AX1800WiFi extender first and foremost.
  • To use the extension, connect your router to it.
  • After that, launch your preferred web browser.
  • Press the enter key after typing into the address box.
  • Use the username and password to access your extender.
  • Select Firmware Upgrade from the options menu.
  • following that, select the option to check
  • If a new firmware version is available, select yes to update the Netgear AX1800 EAX20.
  • Wait a few minutes for the Netgear extender AX1800 firmware to finish updating.

It’s done! The firmware on your extension was upgraded. Feel free to contact our specialists if you run across any issues.

Related articles
Join the discussion!

    1. zortilonrel

      Hey there, You’ve done an incredible job. I will definitely digg it and in my opinion suggest to my friends. I am confident they’ll be benefited from this web site.